APPLICATION GUIDE
Food & Beverage Filter Bags
Food-grade filter bags for juices, syrups, edible oils, flavourings, dairy and drinks production. Compliant with EC 1935/2004 and EU 10/2011, made in the EU under ISO 9001 quality control, individually wrapped and stocked in the UK.
Food and drink producers filter liquids to remove pulp, fibres, sediment and foreign matter, to protect fine cartridge filters downstream and to keep every batch consistent. Bag filters handle high solids loads at a low cost per change. A used bag is simply lifted out and replaced, so there is no filter to clean between batches. CLARIBag food-grade filter bags fit standard Size 1–4 bag filter housings and are stocked in our UK warehouse.
Choosing a food-grade filter bag
Three things decide the right bag: the material, the micron rating and the temperature of the liquid. Polypropylene felt traps fine particles through its depth and holds a lot of dirt. Nylon mesh is a surface filter with a precise opening size, ideal for pulp, seeds and coarse debris. Polyester felt handles hot liquids up to 120 °C.
All CLARIBag polypropylene felt, polyester felt and nylon mesh bags comply with EC Regulation 1935/2004 and EU Regulation 10/2011. The materials meet FDA 21 CFR 177.1520 (polypropylene), 177.1630 (polyester) and 177.1500 (nylon). Every bag is manufactured in the EU at a production site with ISO 9001 quality control, and is individually wrapped to prevent contamination and for full traceability. Halal and Kosher statements are available on request.
Food and beverage applications
- Fruit and vegetable juices: removing seeds, pulp and fibres, then polishing for a clear juice.
- Sugar syrups: removing fibres and undissolved solids that cause sediment and crystallisation.
- Edible oils: clarifying vegetable and seed oils, and filtering cooled fryer oil.
- Flavourings and extracts: removing plant residues for clear, consistent extracts.
- Soft drinks and process water: polishing water used as a product ingredient.
- Wine, cider and spirits: pre-filtering ahead of fine filtration and bottling.
- Dairy, sauces and other foods: milk, soy sauce, vinegar, honey, coconut milk and liquid egg.
- Beer and brewing: see our beer filter bags guide.
Typical micron ratings
- Juice, coarse clarification: 150 micron nylon mesh removes seeds and large pulp but keeps fine pulp and flavour.
- Juice, fine filtration: 1–10 micron PP felt for a visually clear juice.
- Sugar syrup: 50–100 micron mesh or felt for raw syrup, 25 micron felt during blending, 5 micron felt for a final polish.
- Vegetable and seed oils: 50–100 micron nylon mesh to clarify, then 5–10 micron PP felt for fine filtration.
- Fryer oil (cooled below 80 °C): 50 micron nylon mesh.
- Flavourings and extracts: 1–5 micron PP felt.
- Soft drinks and ingredient water: 1–5 micron PP felt.
- Vinegar: 1–5 micron PP felt. Soy sauce: 5–25 micron PP felt.
- Wine pre-filtration, liquid egg: 100 micron nylon mesh.
- Honey, coconut milk: 100–200 micron nylon mesh.
- Milk: 1–5 micron PP felt.
For liquids with a high solids load, use two stages: a coarse mesh bag first, then a felt bag. The felt bag lasts much longer and costly cartridge filters further downstream are protected.
Problems addressed
- Haze and sediment: fine particles leave products cloudy or settle out on the shelf.
- Foreign matter: seeds, fibres, shell fragments and debris that must not reach the customer.
- Short cartridge life: solids blind expensive fine and sterile cartridges too quickly.
- Batch-to-batch variation: inconsistent texture, clarity or flavour.
- Crystallisation in syrups: undissolved particles act as seeds for crystals.
Recommended filter bag types
Polypropylene felt filter bags (1–200 micron)
Depth filtration for fine particles and polishing. The first choice for juices, syrups, flavourings, water and oils. Up to 80 °C.
Nylon mesh filter bags (50–1000 micron)
Surface filtration for pulp, seeds, skins and coarse debris, and a first stage ahead of felt. Up to 80 °C, or 120 °C with a stainless steel ring.
Polyester felt filter bags
For hot syrups and other liquids up to 120 °C.
Need a housing? See our bag filter housings.
Installation and best practice
Keep bags clean until use
Leave each bag in its wrapping until you fit it, and handle it with clean gloves.
One bag per batch or changeover
Fit a new bag for each product or allergen changeover. Filter bags are designed as single-use items in food applications.
Check the temperature
Let hot liquids cool to within the bag's rating, or use polyester felt for liquids up to 120 °C.
When to change bags
Change the bag before the pressure difference across it reaches 1 bar (lower for hot liquids), or at the end of each batch. A pressure gauge either side of the housing makes this easy to see.
Troubleshooting
Bags blocking quickly
The rating is too fine for the solids load, or the liquid is very viscous. Add a coarse mesh first stage, move up one rating, or filter syrups warm within the bag's temperature limit.
Product still hazy
Check that the bag collar seals properly in the housing; a poor seal lets liquid bypass the bag. If it seals well, move to a finer felt rating.
Loss of body, flavour or colour
The rating may be too fine and is removing wanted solids. Move up one rating.
Bag stretched or deformed
The liquid is likely above the bag's temperature limit. Cool the liquid or switch to polyester felt.
FAQs
Are your filter bags food grade?
Yes. Polypropylene felt, polyester felt and nylon mesh bags comply with EC 1935/2004 and EU 10/2011, and the materials meet the relevant FDA 21 CFR regulations. They are manufactured in the EU at a production site with ISO 9001 quality control. Halal and Kosher statements are available on request.
Can I reuse a filter bag?
For food and drink we recommend a new bag for each batch or changeover.
Will the bags fit my housing?
Universal W collar bags fit most standard Size 1–4 housings. For H-type collar housings, choose the Eaton/GAF replacement bags.
What is the minimum order?
5 bags of the same micron rating and size.
Can I set up a trade account?
Yes. Business customers can apply for a 30-day credit account.